CASFOUR-f® | Outside Plant Copper Cable (Exchange Cable) | Copper Clad Steel Shield | Single Jacket | Filled-Gel

Pair Count 6 – 200P

CASFOUR-f® (Telecom Copper Cables | Copper Clad Steel Shield | Filled-Gel)

Description
Applications
Quality & Approval
Data Sheet
Description

Conductors: Solid annealed copper in 19, 22 and 24 AWG.

Insulation: Conductors are insulated with solid polyolefin, color coded in accordance with industry standards.

Twisted Pairs: Individual conductors are twisted into pairs with varying lay lengths to minimize crosstalk and specific color combinations to provide pair identification.

Core Assembly: Cables of 25 pairs or less are assembled into a cylindrical core. Cables larger than 25 pairs are assembled into units, which are then used to assemble the core. Units are individually identifiable by color-coded unit binders.

Filling Compound: The core assembly is filled with an 80° C ETPR or PIB base jelly compound, completely filling the interstices between the pairs and under the core wrap.

CORE WRAP: A non-hygroscopic, dielectric tape is applied over the core assembly to provide protection for the core.

SHIELDING: The dual shielding system consists of two metal tapes.

Inner: A corrugated, copolymer coated, 8-mil aluminum tape is applied directly over the core wrap. The aluminum tape does not butt or overlap at any point along the length of the cable.

Outer: A corrugated, copolymer coated, 6-mil steel tape is applied directly over the aluminum and overlaps. The shield interfaces are flooded with an adhesive compound to provide a moisture barrier and inhibit corrosion.

Jacket: A black, linear low-density polyethylene jacket is applied overall. The jacket provides a tough protective covering designed to withstand exposure to direct sunlight, atmospheric temperature changes, and stresses expected in standard installations.

Jacket Markings: Information, such as manufacturer’s identification, pair count, AWG, product identification and a telephone handset is printed at 2 ft. intervals on the cable jacket. Sequential footage markings are printed at alternate 2 ft. intervals.

Optional Designs: AsFOUR®-F is available with an internal screen for use with T-Carrier systems. AsFOUR®-F+M is also available with mechanical protection.

 

Applications
Quality & Approval
Data Sheet

4S es un líder mundial en la industria de cables y alambres con más de 40 años de experiencia en la fabricación de cables de energía de baja, media y alta tensión, cables de fibra óptica, conductores de aluminio y cables de cobre para telecomunicaciones.

Ventas y soporte técnico
4621 Ponce de Leon Blvd.
Coral Gables, FL 33146 - USA

+1 305.666.7474
+1 305.666.7272 (Fax)

sales@4sproducts.com
technical@4sproducts.com
support@4sproducts.com