ALFOUR-FS®| Outside Plant Copper Cable (Exchange Cable) | Aluminum Shield | Single Jacket | Filled Foam Skin

Pair Count 6 – 2400P

ALFOUR-FS® (Telecom Copper Cables | Aluminum Shield | Filled Foam Skin)

Description
Applications
Quality & Approval
Data Sheet
Description

Conductors: Solid annealed copper in 19, 22, 24 and 26 AWG.

Insulation: Conductors are dual insulated with an inner layer of foam, natural polyolefin covered by an outer layer of solid, colored polyolefin. The conductor insulation is color-coded in accordance with industry standards.

Twisted Pairs: Individual conductors are twisted into pairs with varying lay lengths to minimize crosstalk and specific color combinations to provide pair identification.

Core Assembly: Cables of 25 pairs or less are assembled into a cylindrical core. Cables larger than 25 pairs are assembled into units, which are then used to assemble the core. Units are individually identifiable by color-coded unit binders.

Filling Compound: The core assembly is filled with an 80° C ETPR or PIB base jelly compound, completely filling the interstices between the pairs and under the core wrap.

Core Wrap: A non-hygroscopic, dielectric tape is applied over the core assembly to provide protection for the core.

Shielding: A corrugated, copolymer coated, 8-mil aluminum tape is applied longitudinally with an overlap. The shield interfaces are flooded with an adhesive compound to provide a moisture barrier and inhibit corrosion.

Jacket: A black, linear low-density polyethylene jacket is applied overall. The jacket provides a tough protective covering designed to withstand exposure to direct sunlight, atmospheric temperature changes, and stresses expected in standard installations.

Jacket Markings: Information such as manufacturer’s identification, pair count, AWG, product identification and a telephone handset is printed at 2 ft. intervals on the cable jacket. Sequential footage markings are printed at alternate 2 ft. intervals.

Optional Designs: ALFOUR®-FS cables are also available with an internal screen for use with T-Carrier systems.

Applications
4SProducts ALFOUR®-FS cables are designed for direct burial or duct applications where protection from moisture is required. ALFOUR®-FS cables may be used aerially but must be attached to a support strand (messenger). ALFOUR®-FS cables, in 19, 22, 24 and 26 AWG, are capable of meeting the electrical requirements of 100 ohms, Category 3, Backbone UTP Cables as specified in TIA/EIA-568 -A.
Quality & Approval
Data Sheet

A 4S é líder global na indústria de fios e cabos com mais de 40 anos de experiência na fabricação de cabos de energia de baixa, média e alta tensão, cabos de fibra ótica, condutores de alumínio e cabos de cobre para o setor de telecomunicação.

Vendas & Suporte Técnico
4621 Ponce de Leon Blvd.
Coral Gables, FL 33146 - USA

+1 305.666.7474
+1 305.666.7272 (Fax)

sales@4sproducts.com
technical@4sproducts.com
support@4sproducts.com