ASFOUR® – 2 | Outside Plant Copper Cable (Exchange Cable) | Aluminum Steel Shield | Dual Jacket | Air-Core
Pair Count 6 – 3000P
ASFOUR® – 2 (Telecom Copper Cables | Aluminum Steel Shield | Air-Core )
Conductors: Solid annealed copper in 19, 22, 24 and 26 AWG.
Insulation: Conductors are insulated with a solid polyolefin. The conductor insulation is color-coded in accordance with industry standard.
Twisted Pair: Individual conductors are twisted into pairs with varying lay lengths to minimize crosstalk and specific color combinations to provide pair identification.
Core Assembly: Cables of 25 pairs or less are assembled into a cylindrical core. Cables larger than 25 pairs are assembled into units, which are then used to assemble the core. Units are individually identifiable by color-coded unit binders.
Core Wrap: A non-hygroscopic, dielectric tape is applied over the core assembly to provide protection for the core.
Shielding: The dual shielding system consists of two metal tapes. Inner: A corrugated, copolymer coated, 8-mil aluminum tape is applied directly over the core wrap. The aluminum tape does not butt or overlap at any point along the length of the cable. Outer: A corrugated, copolymer coated, 6-mil steel tape is applied directly over the aluminum and overlaps. The shield interfaces are flooded with an adhesive compound to provide a moisture barrier and inhibit corrosion.
Outer Jacket: A black, linear low-density polyethylene jacket is applied overall. The jacket provides a tough protective covering designed to withstand exposure to direct sunlight, atmospheric temperature changes, and stresses expected in standard installations.
Inner Jacket: A black polyethylene jacket.
Jacket Markings: Information, such as manufacturer’s identification, pair count, AWG, product identification and a telephone handset is printed at 2 ft. intervals on the cable jacket. Sequential footage markings are printed at alternate 2 ft. intervals.
Optional Designs: AsFOUR®-2 is available with an internal screen for use with T-Carrier systems.
A 4S é líder global na indústria de fios e cabos com mais de 40 anos de experiência na fabricação de cabos de energia de baixa, média e alta tensão, cabos de fibra ótica, condutores de alumínio e cabos de cobre para o setor de telecomunicação.
Vendas & Suporte Técnico
4621 Ponce de Leon Blvd.
Coral Gables, FL 33146 - USA
+1 305.666.7272 (Fax)