CASFOUR FS® | Outside Plant Copper Cable (Exchange Cable) | Copper Clad Steel Shield | Single Jacket | Filled Foam Skin
Pair Count 6 – 2400P
CASFOUR-F® (Telecom Copper Cables | Copper Clad Steel Shield | Filled Foam Skin )
Conductors: Solid annealed copper in 19, 22 and 24 AWG.
Insulation: Conductors are insulated with solid polyolefin, color-coded in accordance with industry standards.
Twisted Pairs: Individual conductors are twisted into pairs with varying lay lengths to minimize crosstalk and specific color combinations to provide pair identification.
Core Assembly: Cables of 25 pairs or less are assembled into a cylindrical core. Cables larger than 25 pairs are assembled into units, which are then used to assemble the core. Units are individually identifiable by color-coded unit binders.
Filling Compound: The core assembly is filled with an 80° C ETPR or PIB base jelly compound, completely filling the interstices between the pairs and under the core wrap.
Core Wrap: A non-hygroscopic, dielectric tape is applied over the core assembly to provide protection for the core.
Shielding: The dual shielding system consists of two metal tapes.
Inner: A corrugated, copolymer coated, 8-mil aluminum tape is applied directly over the core wrap. The aluminum tape does not butt or overlap at any point along the length of the cable.
Outer: A corrugated, copolymer coated, 6-mil steel tape is applied directly over the aluminum and overlaps. The shield interfaces are flooded with an adhesive compound to provide a moisture barrier and inhibit corrosion.
Jacket: A black, linear low-density polyethylene jacket is applied overall. The jacket provides a tough protective covering designed to withstand exposure to direct sunlight, atmospheric temperature changes, and stresses expected in standard installations.
Jacket Markings: Information, such as manufacturer’s identification, pair count, AWG, product identification and a telephone handset is printed at 2 ft. intervals on the cable jacket. Sequential footage markings are printed at alternate 2 ft. intervals.
Optional Designs: AsFOUR®-F is available with an internal screen for use with T-Carrier systems. AsFOUR®-F+M is also available with mechanical protection.
4S is a global leader in the wire and cable industry with more 40+ years of experience in manufacturing Low, Medium & High Voltage Energy Cables, Fiber Optic Cables, Aluminum Conductors and Telecom Copper Cables.
Sales & Technical Support
4621 Ponce de Leon Blvd.
Coral Gables, FL 33146 - USA
+1 305.666.7272 (Fax)